Burning in excess of 10,000° F at the tip, Broco® Underwater Ultrathermic Cutting Rods cut or melt virtually any known

Electronics VHF Furuno Radar Depth Sounder / Sonar / Fish Finder Compass Garmin GPS Lights Search light / Spot light 

Fixed Base Router with Plunge Router Base. Model # 6931 \ 6902. Excellent condition. Comes in case. Single speed motor.

Pressure washer was used three times and have  no problem

Manitou MT1335 available! 2015/16 model showing 1658hrs, 13m reach and 3.5 tonne lift capacity. Perkins engine (EPA approved) with 101hp,

Unit is in good working condition, but needs a tachometer.  Unit has no AC, substitute Alternator is fitted, Original Alternator

5 40′ Shipping containers for sale. All in excellent condition.  Will Load them on truck for free.  AS IS WHERE

Bi-energy articulated boom lift available, Manitou 150AETJ, 2014 model showing 600hrs and 15m working height. Contact the Mawsley team for

Holroyd 60:1 reduction gearbox 

Semi-Industrial Forklift, 2015 model showing 2314hrs, great condition, 4845kg unladen weight. 3.3m duplex mast and 3.5 tonne lift capacity, fitted

Vehicle works well offer invited 

25 4 CORE ARMORED CABLE 56 FEET LENGTH ASAP SALE $1400  

Manitou MT1335 available for sale! 2016 model with approx 2000hrs, 13m reach and 3.5 tonne lift capaicity. Comes with JSM

Lowrance Elite 7 HDI in good condition, used twice for demo, comes with transducer and cables, additional battery plug and

14m JCB in stock! 535-140 Hi Viz model, manufactured in 2015 currently showing 1717hrs, unladen weight of 11,170kg. Maximum reach

Manitou MLT in stock! MLT 845-120, 2013 model with a total 6300hrs, new clock currently showing 2930hrs, unladen weight of

Telehandler/Loadall, JCB 533-105, 2013 model showing 2500hrs, 8780kg unladen weight, 10.5m reach, 3.3 tonne load capacity, 4WD, 3 mode steer,

Mack flat beds, box trucks and tractor heads for sale. trucks in various stages of scrapping 

Good condition just buy and drive to do your jobs just selling to buy something else it works really great

2018 36 tonne Komatsu available! PC360LC-11 in excellent condition, 2018 model with hours showing of approx 700-900, steel tracks with

200 feet of main boom, 60 feet of jib second hc258 as spare parts available

Harness came out of a cs3 lancer with a 4g15 engine 2 coil packs. In excellent condition.

Never used. Don’t need it

Harness and landyard  Excellent condition  Price negotiable 

 28ft pirogue, 75hp mercury engine . Good condition price neg.

Dynapac CC1200 Tandem Roller, very good condition, manufactured in 2013 now showing 764hrs. 2620kg operating weight and 120cm roller width,

Four good second-hand tires 265-65-17 only driven on couple months

Telehandler/Loadall, 2014, 2044hrs, 8780kg unladen weight, 10.5m reach, 3.3 tonne load capacity, 4WD, 3 mode steer, dual lever control, JCB

Compair compressor in stock! C76, good working condition, 2007 model showing 3951hrs, operating weight of 1300kg. 7 bar, 7.6m3/min air

Manitou MLT in stock! MLT 845-120, 2015 model showing 3653hrs with an unladen weight 8645kg. 8m max reach and a

Nissan QG Manual Flywheel, Original Nissan Clutch Disc & Exedy Pressure Plate for sale. Flywheel and clutch disc is foreign

As stated I have a 2017 hybrid battery pack for sale 

2 Way Hammer Lines, HBCV’s, Hydraulic Quick Hitch, Air Conditioning, Boxing Ring Safety Rails, Rear Camera, 700mm Steel Tracks, Beacon.

Ammann tandem roller in stock! ARX26 , great condition, 2017 model showing 890hrs, operating weight of 2460kg and a 260cm

Caterpillar 428, Series 1 (foreign used tractor Cab) $4000 negotiable as shown in the pics Call/whatsapp owner at 368-9361 for

Used Once Specs: Engine: GX160 Displacement: 163 (cc) Ignition System: Transistorized Magneto Oil Alert: Yes Starting System: Recoil Stopping System: Transistor

20ft and 40ft reefer containers  20ft and 40ft dry containers  Office containers  Call: (868)702-6969

Canopy for truck storage or whatever use you choose to convert it into.

Electric articulated boom lift, 2018 Ex-demo, 2018, 21hrs, 2650kg unladen, 9.85m max height, 200kg platform capacity, 2WD. +44 (0)1604 880621

Hammer Lines, Hydraulic Quick Hitch, 3 HBCV’s, Air Conditioning, Boxing Ring Safety Rails, Rear Camera, Worklights, Beacon. S/No 2134727   

This tunneller is a 1992 model, which has been recomissioned over the years, it has a service weight of 48,000kg

Manitou MT625 Easy models available, 2018 models with hours of 400-450hrs. All in good working condition, 6m reach and 2.5

18m Telehandler/Loadall, great working condition, the MT1840 is a 2014 model showing 4991hrs. Maximum reach of 18m and a maximum